Configuring each kubelet in your cluster using kubeadm

The lifecycle of the kubeadm CLI tool is decoupled from the kubelet, which is a daemon that runs on each node within the Kubernetes cluster. The kubeadm CLI tool is executed by the user when Kubernetes is initialized or upgraded, whereas the kubelet is always running in the background.

Since the kubelet is a daemon, it needs to be maintained by some kind of an init system or service manager. When the kubelet is installed using DEBs or RPMs, systemd is configured to manage the kubelet. You can use a different service manager instead, but you need to configure it manually.

Some kubelet configuration details need to be the same across all kubelets involved in the cluster, while other configuration aspects need to be set on a per-kubelet basis to accommodate the different characteristics of a given machine (such as OS, storage, and networking). You can manage the configuration of your kubelets manually, but kubeadm now provides a KubeletConfiguration API type for managing your kubelet configurations centrally.

Kubelet configuration patterns

The following sections describe patterns to kubelet configuration that are simplified by using kubeadm, rather than managing the kubelet configuration for each Node manually.

Propagating cluster-level configuration to each kubelet

You can provide the kubelet with default values to be used by kubeadm init and kubeadm join commands. Interesting examples include using a different container runtime or setting the default subnet used by services.

If you want your services to use the subnet 10.96.0.0/12 as the default for services, you can pass the --service-cidr parameter to kubeadm:

kubeadm init --service-cidr 10.96.0.0/12

Virtual IPs for services are now allocated from this subnet. You also need to set the DNS address used by the kubelet, using the --cluster-dns flag. This setting needs to be the same for every kubelet on every manager and Node in the cluster. The kubelet provides a versioned, structured API object that can configure most parameters in the kubelet and push out this configuration to each running kubelet in the cluster. This object is called KubeletConfiguration. The KubeletConfiguration allows the user to specify flags such as the cluster DNS IP addresses expressed as a list of values to a camelCased key, illustrated by the following example:

apiVersion: kubelet.config.k8s.io/v1beta1
kind: KubeletConfiguration
clusterDNS:
- 10.96.0.10

For more details on the KubeletConfiguration have a look at this section.

Providing instance-specific configuration details

Some hosts require specific kubelet configurations due to differences in hardware, operating system, networking, or other host-specific parameters. The following list provides a few examples.

• The path to the DNS resolution file, as specified by the --resolv-conf kubelet configuration flag, may differ among operating systems, or depending on whether you are using systemd-resolved. If this path is wrong, DNS resolution will fail on the Node whose kubelet is configured incorrectly.

• The Node API object .metadata.name is set to the machine's hostname by default, unless you are using a cloud provider. You can use the --hostname-override flag to override the default behavior if you need to specify a Node name different from the machine's hostname.

• Currently, the kubelet cannot automatically detect the cgroup driver used by the container runtime, but the value of --cgroup-driver must match the cgroup driver used by the container runtime to ensure the health of the kubelet.

• To specify the container runtime you must set its endpoint with the --container-runtime-endpoint=<path> flag.

The recommended way of applying such instance-specific configuration is by using KubeletConfiguration patches.

Configure kubelets using kubeadm

It is possible to configure the kubelet that kubeadm will start if a custom KubeletConfiguration API object is passed with a configuration file like so kubeadm ... --config some-config-file.yaml.

By calling kubeadm config print init-defaults --component-configs KubeletConfiguration you can see all the default values for this structure.

It is also possible to apply instance-specific patches over the base KubeletConfiguration. Have a look at Customizing the kubelet for more details.

Workflow when using kubeadm init

When you call kubeadm init, the kubelet configuration is marshalled to disk at /var/lib/kubelet/config.yaml, and also uploaded to a kubelet-config ConfigMap in the kube-system namespace of the cluster. A kubelet configuration file is also written to /etc/kubernetes/kubelet.conf with the baseline cluster-wide configuration for all kubelets in the cluster. This configuration file points to the client certificates that allow the kubelet to communicate with the API server. This addresses the need to propagate cluster-level configuration to each kubelet.

To address the second pattern of providing instance-specific configuration details, kubeadm writes an environment file to /var/lib/kubelet/kubeadm-flags.env, which contains a list of flags to pass to the kubelet when it starts. The flags are presented in the file like this:

KUBELET_KUBEADM_ARGS="--flag1=value1 --flag2=value2 ..."

In addition to the flags used when starting the kubelet, the file also contains dynamic parameters such as the cgroup driver and whether to use a different container runtime socket (--cri-socket).

After marshalling these two files to disk, kubeadm attempts to run the following two commands, if you are using systemd:

systemctl daemon-reload && systemctl restart kubelet

If the reload and restart are successful, the normal kubeadm init workflow continues.

Workflow when using kubeadm join

When you run kubeadm join, kubeadm uses the Bootstrap Token credential to perform a TLS bootstrap, which fetches the credential needed to download the kubelet-config ConfigMap and writes it to /var/lib/kubelet/config.yaml. The dynamic environment file is generated in exactly the same way as kubeadm init.

Next, kubeadm runs the following two commands to load the new configuration into the kubelet:

systemctl daemon-reload && systemctl restart kubelet

After the kubelet loads the new configuration, kubeadm writes the /etc/kubernetes/bootstrap-kubelet.conf KubeConfig file, which contains a CA certificate and Bootstrap Token. These are used by the kubelet to perform the TLS Bootstrap and obtain a unique credential, which is stored in /etc/kubernetes/kubelet.conf.

When the /etc/kubernetes/kubelet.conf file is written, the kubelet has finished performing the TLS Bootstrap. Kubeadm deletes the /etc/kubernetes/bootstrap-kubelet.conf file after completing the TLS Bootstrap.

The kubelet drop-in file for systemd

kubeadm ships with configuration for how systemd should run the kubelet. Note that the kubeadm CLI command never touches this drop-in file.

This configuration file installed by the kubeadm DEB or RPM package is written to /etc/systemd/system/kubelet.service.d/10-kubeadm.conf and is used by systemd. It augments the basic kubelet.service for RPM or kubelet.service for DEB:

[Service]
Environment="KUBELET_KUBECONFIG_ARGS=--bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf"
Environment="KUBELET_CONFIG_ARGS=--config=/var/lib/kubelet/config.yaml"
# This is a file that "kubeadm init" and "kubeadm join" generate at runtime, populating
# the KUBELET_KUBEADM_ARGS variable dynamically
EnvironmentFile=-/var/lib/kubelet/kubeadm-flags.env
# This is a file that the user can use for overrides of the kubelet args as a last resort. Preferably,
# the user should use the .NodeRegistration.KubeletExtraArgs object in the configuration files instead.
# KUBELET_EXTRA_ARGS should be sourced from this file.
EnvironmentFile=-/etc/default/kubelet
ExecStart=
ExecStart=/usr/bin/kubelet $KUBELET_KUBECONFIG_ARGS $KUBELET_CONFIG_ARGS $KUBELET_KUBEADM_ARGS $KUBELET_EXTRA_ARGS

This file specifies the default locations for all of the files managed by kubeadm for the kubelet.

• The KubeConfig file to use for the TLS Bootstrap is /etc/kubernetes/bootstrap-kubelet.conf, but it is only used if /etc/kubernetes/kubelet.conf does not exist.
• The KubeConfig file with the unique kubelet identity is /etc/kubernetes/kubelet.conf.
• The file containing the kubelet's ComponentConfig is /var/lib/kubelet/config.yaml.
• The dynamic environment file that contains KUBELET_KUBEADM_ARGS is sourced from /var/lib/kubelet/kubeadm-flags.env.
• The file that can contain user-specified flag overrides with KUBELET_EXTRA_ARGS is sourced from /etc/default/kubelet (for DEBs), or /etc/sysconfig/kubelet (for RPMs). KUBELET_EXTRA_ARGS is last in the flag chain and has the highest priority in the event of conflicting settings.

Kubernetes binaries and package contents

The DEB and RPM packages shipped with the Kubernetes releases are: